Hebei Baisiwei Import&Export Trade Co., LTD.
1.The car is equipped with two different output ports, For iPod/Others, for charging different devices.
3. Connect the USB terminal to the car charger output terminal, and then connect the corresponding plug to the power device (such as mobile phone, MP3, camera series, etc.) for power supply or charging. If you charge your iPod iphone, you can use the IPOD connector with cable.
4. After the equipment is fully charged, please pull out the car charger from the car cigarette lighter.
1. Please start the car and then insert the car charger.
2. Please pull out the car after use or after the car is turned off. .
3. Do not use the car charger for electronic products that exceed the charging specifications. When the two interfaces are used at the same time, it is recommended that the total number of batteries to be charged within 2100mA be the normal use range, so as to avoid any problems caused by the specifications.
4, the car will be heated during use, at normal room temperature, the fever does not exceed 60 degrees C is a normal phenomenon.
5. When the car is over-current, over-temperature, and short-circuit protected, it will stop working (the car charger automatically resumes work after the equipment is unplugged). At this time, you need to check whether the equipment matches the car charging parameters.
Copyright © 2019 Hebei Baisiwei Import&Export Trade Co., LTD. All rights reserved.